Ta treść jest obecnie dostępna w języku angielskim.
Potwierdź zgodność, materiały i personalizację w zapytaniu.
Części naprawcze
Replacement LCD Screen Display For 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel
Kod produktu: IPG-LP-00358
Replacement LCD Screen Display For 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel. Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI; Refresh rate: 60 Hz.
- Model telefonu
- 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel
- Minimalna ilość
- Do potwierdzenia przy wycenie
Najpierw zgodnośćSprawdź dokładny model telefonu przed wysłaniem zapytania.
O tym produkcie
Replacement LCD Screen Display For 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel.
Product details
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Service part covered — this listing
- 01YN128
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel
Match the listed 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel model and part configuration before selecting a replacement.
Specyfikacja
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Service part covered — this listing
- 01YN128
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- 01YN128 14.0 inch WQHD Anti-Glare 300nit Panel
Opinie 0
Nie ma jeszcze opinii.
Podziel się doświadczeniem
