Questo contenuto è attualmente disponibile in inglese.
Conferma compatibilità, materiali e personalizzazione nella richiesta.
Ricambi
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
Codice prodotto: IPG-LP-00430
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel. Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI; Refresh rate: 60 Hz.
Richiedi un preventivo
Disponibilità e prezzi vengono confermati dopo la richiesta.
- Modello di telefono
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
- Quantità minima
- Da confermare nel preventivo
Prima di tutto, la compatibilitàVerifica il modello esatto del telefono prima di inviare la richiesta.
Informazioni sul prodotto
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel.
Product details
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Part number covered — this listing
- SD10M67992
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
Match the listed SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel model and part configuration before selecting a replacement.
Specifiche
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Part number covered — this listing
- SD10M67992
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
Recensioni 0
Ancora nessuna recensione.
Condividi la tua esperienza
