このコンテンツは現在、英語でのみご覧いただけます。
対応機種、素材、カスタマイズ内容はお問い合わせ時にご確認ください。
修理部品
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
商品コード: IPG-LP-00430
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel. Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI; Refresh rate: 60 Hz.
- スマートフォンの機種
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
- 最低数量
- お見積もり時に確認
まずは対応機種を確認お問い合わせ前に、スマートフォンの正確な機種名をご確認ください。
この商品について
Replacement LCD Screen Display For SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel.
Product details
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Part number covered — this listing
- SD10M67992
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
Match the listed SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel model and part configuration before selecting a replacement.
仕様
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, 3.3 V — the plug is about 25 mm across. Count the contacts on the flex of your old screen before ordering: a 30-pin panel is a different part and will not plug into this screen
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Part number covered — this listing
- SD10M67992
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- SD10M67992 14.0 inch WQHD Anti-Glare 300nit Panel
レビュー 0
レビューはまだありません。
ご感想を共有してください
