このコンテンツは現在、英語でのみご覧いただけます。
対応機種、素材、カスタマイズ内容はお問い合わせ時にご確認ください。
修理部品
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
商品コード: IPG-LP-00420
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel. Panel model codes: N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1; Screen size: 13.3 inches diagonal (33.8 cm), 16:9; Resolution: 1366 x 768 px (WXGA HD), 118 ppi.
- スマートフォンの機種
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
- 最低数量
- お見積もり時に確認
まずは対応機種を確認お問い合わせ前に、スマートフォンの正確な機種名をご確認ください。
この商品について
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel.
Product details
- Panel model codes
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Screen size
- 13.3 inches diagonal (33.8 cm), 16:9
- Resolution
- 1366 x 768 px (WXGA HD), 118 ppi
- Refresh rate
- 60 Hz
- Panel technology
- a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board
- Brightness
- 300 cd/m² typical on all three codes — a brighter panel than the 220 cd/m² screens that share this same 13.3 inch size, so expect a brighter picture than the panel you may be removing
- Contrast ratio
- 400:1 on the N133BGE-EAA and the N133BGG-EA1, 650:1 on the N133BGE-EB1. This is a real difference between the codes rather than a measurement error, and it is the only specification that separates them
- Touch
- Non-touch, display-only panel. Touch builds of these machines take a separate bonded assembly instead of this bare panel
- Signal interface
- eDP 1.2, 1 lane, 30-pin FPC, 3.3 V
- Connector position
- Bottom right, viewed from the back of the panel
- Mounting
- Slim bracketless panel (PCBA flat type, 2.85 mm) with no mounting tabs on any of the three codes — the bezel and the hinge brackets already fitted in the machine stay in place
- Cross-reference
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — listed as equivalents, with the same footprint and the same 30-pin pinout
- Device
- Model numbers / part codes
- Panel codes covered
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Interchangeable panel codes
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — same 13.3 inch WXGA footprint, same 30-pin single-lane eDP pinout
- Production note
- The N133BGG-EA1 went into mass production in 2015 and is now discontinued, and the N133BGE-EAA is the current code for machines that shipped with it, so a machine carrying either code takes this panel
- NOT N133BGE-EAB
- One letter away and a different part — 195.2 mm tall against 189.15 mm here, with eight mounting ears. We list that code separately; check the frame height on the panel you are removing
- Compatibility
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
Match the listed N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel model and part configuration before selecting a replacement.
仕様
- Panel model codes
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Screen size
- 13.3 inches diagonal (33.8 cm), 16:9
- Resolution
- 1366 x 768 px (WXGA HD), 118 ppi
- Refresh rate
- 60 Hz
- Panel technology
- a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board
- Brightness
- 300 cd/m² typical on all three codes — a brighter panel than the 220 cd/m² screens that share this same 13.3 inch size, so expect a brighter picture than the panel you may be removing
- Contrast ratio
- 400:1 on the N133BGE-EAA and the N133BGG-EA1, 650:1 on the N133BGE-EB1. This is a real difference between the codes rather than a measurement error, and it is the only specification that separates them
- Touch
- Non-touch, display-only panel. Touch builds of these machines take a separate bonded assembly instead of this bare panel
- Signal interface
- eDP 1.2, 1 lane, 30-pin FPC, 3.3 V
- Connector position
- Bottom right, viewed from the back of the panel
- Mounting
- Slim bracketless panel (PCBA flat type, 2.85 mm) with no mounting tabs on any of the three codes — the bezel and the hinge brackets already fitted in the machine stay in place
- Cross-reference
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — listed as equivalents, with the same footprint and the same 30-pin pinout
- Device
- Model numbers / part codes
- Panel codes covered
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Interchangeable panel codes
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — same 13.3 inch WXGA footprint, same 30-pin single-lane eDP pinout
- Production note
- The N133BGG-EA1 went into mass production in 2015 and is now discontinued, and the N133BGE-EAA is the current code for machines that shipped with it, so a machine carrying either code takes this panel
- NOT N133BGE-EAB
- One letter away and a different part — 195.2 mm tall against 189.15 mm here, with eight mounting ears. We list that code separately; check the frame height on the panel you are removing
- Compatibility
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
レビュー 0
レビューはまだありません。
ご感想を共有してください
