Pièces de réparation
Ce contenu est actuellement disponible en anglais.

Veuillez confirmer la compatibilité, les matières et la personnalisation dans votre demande.
Pièces de réparation
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
Référence produit: IPG-LP-00420
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel. Panel model codes: N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1; Screen size: 13.3 inches diagonal (33.8 cm), 16:9; Resolution: 1366 x 768 px (WXGA HD), 118 ppi.
Demander un devis
La disponibilité et les prix sont confirmés après votre demande.
- Modèle de téléphone
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
- Quantité minimale
- À confirmer avec le devis
La compatibilité avant toutVérifiez le modèle exact de votre téléphone avant d’envoyer votre demande.
À propos de cet article
Replacement LCD Screen Display For N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel.
Product details
- Panel model codes
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Screen size
- 13.3 inches diagonal (33.8 cm), 16:9
- Resolution
- 1366 x 768 px (WXGA HD), 118 ppi
- Refresh rate
- 60 Hz
- Panel technology
- a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board
- Brightness
- 300 cd/m² typical on all three codes — a brighter panel than the 220 cd/m² screens that share this same 13.3 inch size, so expect a brighter picture than the panel you may be removing
- Contrast ratio
- 400:1 on the N133BGE-EAA and the N133BGG-EA1, 650:1 on the N133BGE-EB1. This is a real difference between the codes rather than a measurement error, and it is the only specification that separates them
- Touch
- Non-touch, display-only panel. Touch builds of these machines take a separate bonded assembly instead of this bare panel
- Signal interface
- eDP 1.2, 1 lane, 30-pin FPC, 3.3 V
- Connector position
- Bottom right, viewed from the back of the panel
- Mounting
- Slim bracketless panel (PCBA flat type, 2.85 mm) with no mounting tabs on any of the three codes — the bezel and the hinge brackets already fitted in the machine stay in place
- Cross-reference
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — listed as equivalents, with the same footprint and the same 30-pin pinout
- Device
- Model numbers / part codes
- Panel codes covered
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Interchangeable panel codes
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — same 13.3 inch WXGA footprint, same 30-pin single-lane eDP pinout
- Production note
- The N133BGG-EA1 went into mass production in 2015 and is now discontinued, and the N133BGE-EAA is the current code for machines that shipped with it, so a machine carrying either code takes this panel
- NOT N133BGE-EAB
- One letter away and a different part — 195.2 mm tall against 189.15 mm here, with eight mounting ears. We list that code separately; check the frame height on the panel you are removing
- Compatibility
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
Match the listed N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel model and part configuration before selecting a replacement.
Caractéristiques
- Panel model codes
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Screen size
- 13.3 inches diagonal (33.8 cm), 16:9
- Resolution
- 1366 x 768 px (WXGA HD), 118 ppi
- Refresh rate
- 60 Hz
- Panel technology
- a-Si TFT-LCD, TN, normally white, transmissive — matte anti-glare surface with hard coating 3H, WLED edge-lit backlight with the LED driver on the panel board
- Brightness
- 300 cd/m² typical on all three codes — a brighter panel than the 220 cd/m² screens that share this same 13.3 inch size, so expect a brighter picture than the panel you may be removing
- Contrast ratio
- 400:1 on the N133BGE-EAA and the N133BGG-EA1, 650:1 on the N133BGE-EB1. This is a real difference between the codes rather than a measurement error, and it is the only specification that separates them
- Touch
- Non-touch, display-only panel. Touch builds of these machines take a separate bonded assembly instead of this bare panel
- Signal interface
- eDP 1.2, 1 lane, 30-pin FPC, 3.3 V
- Connector position
- Bottom right, viewed from the back of the panel
- Mounting
- Slim bracketless panel (PCBA flat type, 2.85 mm) with no mounting tabs on any of the three codes — the bezel and the hinge brackets already fitted in the machine stay in place
- Cross-reference
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — listed as equivalents, with the same footprint and the same 30-pin pinout
- Device
- Model numbers / part codes
- Panel codes covered
- N133BGE-EAA · N133BGE-EB1 · N133BGG-EA1
- Interchangeable panel codes
- N133BGA-EA2 · N133BGE-EA1 · LP133WH2-SPA2 — same 13.3 inch WXGA footprint, same 30-pin single-lane eDP pinout
- Production note
- The N133BGG-EA1 went into mass production in 2015 and is now discontinued, and the N133BGE-EAA is the current code for machines that shipped with it, so a machine carrying either code takes this panel
- NOT N133BGE-EAB
- One letter away and a different part — 195.2 mm tall against 189.15 mm here, with eight mounting ears. We list that code separately; check the frame height on the panel you are removing
- Compatibility
- N133BGE-EAA N133BGE-EB1 N133BGG-EA1 13.3 inch HD Panel
Avis 0
Aucun avis pour le moment.
Partagez votre expérience
Vous aimerez peut-être aussi
Tout voir
Pièces de réparation
Coque arrière transparente en TPU pour iPhone 18 Pro Max / 17 Pro Max
Demander un devis
Pièces de réparation











