이 콘텐츠는 현재 영어로 제공됩니다.
문의 시 호환성, 소재 및 맞춤 제작 사항을 확인해 주세요.
수리 부품
Replacement LCD Screen Display For B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel
상품 코드: IPG-LP-00366
Replacement LCD Screen Display For B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel. Panel code — this listing: B140QAN02.2. Read the code printed on the label on the back of the screen you are removing and compare the suffix: .2 is this glossy 300 cd/m² panel; Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI.
- 휴대폰 모델
- B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel
- 최소 수량
- 견적 시 확인
호환성부터 확인하세요문의를 보내기 전에 정확한 휴대폰 모델을 확인해 주세요.
상품 소개
Replacement LCD Screen Display For B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel.
Product details
- Panel code — this listing
- B140QAN02.2. Read the code printed on the label on the back of the screen you are removing and compare the suffix: .2 is this glossy 300 cd/m² panel
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Surface finish
- Glossy (Haze 0%) with a 3H hard coating. If the front of the screen you are removing is matte, you need the anti-glare suffix instead — the two are not the same finish even though the frame is identical
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, HBR1 (2.7 Gbit/s per lane), eDP1.4, 3.3 V — the plug is about 25 mm across with 0.5 mm contact pitch
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Panel code covered — this listing
- B140QAN02.2
- NOT the Full HD panel
- These families also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel
Match the listed B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel model and part configuration before selecting a replacement.
제품 사양
- Panel code — this listing
- B140QAN02.2. Read the code printed on the label on the back of the screen you are removing and compare the suffix: .2 is this glossy 300 cd/m² panel
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz
- Surface finish
- Glossy (Haze 0%) with a 3H hard coating. If the front of the screen you are removing is matte, you need the anti-glare suffix instead — the two are not the same finish even though the frame is identical
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Signal interface
- eDP, 4 lanes, 40-pin connector, HBR1 (2.7 Gbit/s per lane), eDP1.4, 3.3 V — the plug is about 25 mm across with 0.5 mm contact pitch
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Panel code covered — this listing
- B140QAN02.2
- NOT the Full HD panel
- These families also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel
리뷰 0
아직 리뷰가 없습니다.
사용 경험을 공유해 주세요
