Replacement LCD Screen Display For B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel

Replacement LCD Screen Display For B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel.

Product details

Panel code — this listing

B140QAN02.2. Read the code printed on the label on the back of the screen you are removing and compare the suffix: .2 is this glossy 300 cd/m² panel

Screen size

14.0 inches diagonal (35.6 cm), 16:9

Resolution

2560 x 1440 px (WQHD), 210 PPI

Refresh rate

60 Hz

Surface finish

Glossy (Haze 0%) with a 3H hard coating. If the front of the screen you are removing is matte, you need the anti-glare suffix instead — the two are not the same finish even though the frame is identical

Touch

No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it

Signal interface

eDP, 4 lanes, 40-pin connector, HBR1 (2.7 Gbit/s per lane), eDP1.4, 3.3 V — the plug is about 25 mm across with 0.5 mm contact pitch

Connector position

Bottom right, viewed from the back of the panel

Device

Model numbers / part codes

Panel code covered — this listing

B140QAN02.2

NOT the Full HD panel

These families also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel

NOT a touch assembly or a full display

This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel

Compatibility

B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel

Match the listed B140QAN02.2 14.0 inch WQHD Glossy 300nit Panel model and part configuration before selecting a replacement.