Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel

Name: Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel
SKU: IPG-LP-00416

商品コード: IPG-LP-00416

Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel. Panel code — this listing: LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not; Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI.

見積もりを依頼

取扱状況と価格はお問い合わせ後に確認します。

お問い合わせを送信

スマートフォンの機種: LPM140M420 14.0 inch WQHD Glossy 500nit Panel
最低数量: お見積もり時に確認

まずは対応機種を確認お問い合わせ前に、スマートフォンの正確な機種名をご確認ください。

この商品について

Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel.

Product details

Panel code — this listing: LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not
Screen size: 14.0 inches diagonal (35.6 cm), 16:9
Resolution: 2560 x 1440 px (WQHD), 210 PPI
Refresh rate: 60 Hz. One factory record also notes a 48 Hz dynamic refresh mode on this panel; the machines below run it at 60 Hz
Panel technology: LTPS TFT-LCD, IPS wide-viewing-angle panel (normally black, transmissive, 88/88/88/88), 16.7M colours, with a WLED edge-lit backlight and the LED driver on the panel board
Surface finish: Glossy (Haze 0%) with a hard coating, consistent across the factory records. If the front of the screen you are removing is matte you need the anti-glare part instead — same frame, same connector, different surface
Touch: No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
Connector position: Bottom right, viewed from the back of the panel
Device: Model numbers / part codes
Panel code covered — this listing: LPM140M420
NOT the Full HD panel: The X1 Carbon and T-series machines also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
NOT a touch assembly or a full display: This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
Compatibility: LPM140M420 14.0 inch WQHD Glossy 500nit Panel

Match the listed LPM140M420 14.0 inch WQHD Glossy 500nit Panel model and part configuration before selecting a replacement.

仕様

Panel code — this listing: LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not
Screen size: 14.0 inches diagonal (35.6 cm), 16:9
Resolution: 2560 x 1440 px (WQHD), 210 PPI
Refresh rate: 60 Hz. One factory record also notes a 48 Hz dynamic refresh mode on this panel; the machines below run it at 60 Hz
Panel technology: LTPS TFT-LCD, IPS wide-viewing-angle panel (normally black, transmissive, 88/88/88/88), 16.7M colours, with a WLED edge-lit backlight and the LED driver on the panel board
Surface finish: Glossy (Haze 0%) with a hard coating, consistent across the factory records. If the front of the screen you are removing is matte you need the anti-glare part instead — same frame, same connector, different surface
Touch: No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
Connector position: Bottom right, viewed from the back of the panel
Device: Model numbers / part codes
Panel code covered — this listing: LPM140M420
NOT the Full HD panel: The X1 Carbon and T-series machines also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
NOT a touch assembly or a full display: This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
Compatibility: LPM140M420 14.0 inch WQHD Glossy 500nit Panel