Deze inhoud is momenteel beschikbaar in het Engels.
Bevestig de compatibiliteit, materialen en personalisatie in je aanvraag.
Reparatieonderdelen
Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel
Artikelnummer: IPG-LP-00416
Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel. Panel code — this listing: LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not; Screen size: 14.0 inches diagonal (35.6 cm), 16:9; Resolution: 2560 x 1440 px (WQHD), 210 PPI.
- Telefoonmodel
- LPM140M420 14.0 inch WQHD Glossy 500nit Panel
- Minimumaantal
- Bevestigen bij de offerte
Compatibiliteit komt eerstControleer je exacte telefoonmodel voordat je de aanvraag verstuurt.
Over dit product
Replacement LCD Screen Display For LPM140M420 14.0 inch WQHD Glossy 500nit Panel.
Product details
- Panel code — this listing
- LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz. One factory record also notes a 48 Hz dynamic refresh mode on this panel; the machines below run it at 60 Hz
- Panel technology
- LTPS TFT-LCD, IPS wide-viewing-angle panel (normally black, transmissive, 88/88/88/88), 16.7M colours, with a WLED edge-lit backlight and the LED driver on the panel board
- Surface finish
- Glossy (Haze 0%) with a hard coating, consistent across the factory records. If the front of the screen you are removing is matte you need the anti-glare part instead — same frame, same connector, different surface
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Panel code covered — this listing
- LPM140M420
- NOT the Full HD panel
- The X1 Carbon and T-series machines also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- LPM140M420 14.0 inch WQHD Glossy 500nit Panel
Match the listed LPM140M420 14.0 inch WQHD Glossy 500nit Panel model and part configuration before selecting a replacement.
Specificaties
- Panel code — this listing
- LPM140M420. Read the code on the label on the back of the screen you are removing and compare it with this one. Some suppliers write the same panel as LPM140M420 A or LP140M420 — the strings differ, the panel does not
- Screen size
- 14.0 inches diagonal (35.6 cm), 16:9
- Resolution
- 2560 x 1440 px (WQHD), 210 PPI
- Refresh rate
- 60 Hz. One factory record also notes a 48 Hz dynamic refresh mode on this panel; the machines below run it at 60 Hz
- Panel technology
- LTPS TFT-LCD, IPS wide-viewing-angle panel (normally black, transmissive, 88/88/88/88), 16.7M colours, with a WLED edge-lit backlight and the LED driver on the panel board
- Surface finish
- Glossy (Haze 0%) with a hard coating, consistent across the factory records. If the front of the screen you are removing is matte you need the anti-glare part instead — same frame, same connector, different surface
- Touch
- No — this is the non-touch panel supplied on its own, with no touch layer and no digitizer glass. If the screen you are removing responds to your finger, you need the touch assembly instead and this panel is not it
- Connector position
- Bottom right, viewed from the back of the panel
- Device
- Model numbers / part codes
- Panel code covered — this listing
- LPM140M420
- NOT the Full HD panel
- The X1 Carbon and T-series machines also shipped with 14.0 inch Full HD 1920x1080 panels on a 30-pin connector. Different resolution, different pin count, different part — a Full HD machine will not drive this WQHD panel
- NOT a touch assembly or a full display
- This listing is the non-touch screen panel on its own. Touch screens for these machines are separate assemblies with the digitizer built in, and they are not interchangeable with this bare panel
- Compatibility
- LPM140M420 14.0 inch WQHD Glossy 500nit Panel
Beoordelingen 0
Nog geen beoordelingen.
Deel je ervaring
Dit vind je misschien ook leuk
Alles bekijken
Reparatieonderdelen
